Battery squeeze acupuncture one test box

Product Categories

Dongguan MENTEK Testing Equipment Co.,Ltd.
Address: Dongcheng District, Dongguan City,
Yu Wai Commercial Street, 77-78
Tel: +86 769-22687480
Fax: +86 769-22687476
E-mail: mentek05@126.com Phone: +86 18688681636
Contact: Mr. Guan
Web: en.dgmenteks.com

4dhcpmingchen

Location: Home -> Products -> Battery safety testing equipment -> Battery safety test equipment -> Battery burning test machine -> Battery squeeze acupuncture one test box

Battery squeeze acupuncture one test box

[View Original] [BACK]

Battery squeeze acupuncture one test box

Equipment use ：
Battery Extrusion Tester for all types of battery-level simulation in the treatment of household waste, the battery was squeezed (such as compaction of garbage) situation

Features:
1, wire jacket are set with metal fire tube, effectively prevent the battery test process of burning and burning phenomenon
2, installed lighting tube, can be clearly seen on the outside for indoor situation:
3, acupuncture / extrusion speed 1 0.80mm / s can be adjusted:
4, needle puncture / squeeze the halo value of 2 50N, 1 3KN can be set to meet the different standards: installed test holes and fill the air, fill the air + exhaust fan will be more effective test exhaust gas and pressure quickly removed: test hole To provide a tester who wants to detect the temperature or pressure in the test space and design:
5, the control part of the test box and the separation of the form, can be operated at l'2 meters, play a 'security measures

Power battery squeeze acupuncture machine

Acupuncture test standard
GB / T 1 8332.2-2001 Standard puncture test for metal hydride storage batteries for electric road vehicles
Standard Specification for Lithium - ion Batteries for Miner'slamps

Extrusion test standard
GB / T 2900.11-1 988 Mineral lamp with lithium-ion battery safety performance test specification "squeeze"
YD 1 268-2003 Mobile communication handheld file Safety requirements for batteries and chargers "Extrusion resistance"
SJ / T 11 1 69-1 998 ~ = battery standard "extrusion test"
UL 1 642 Safety Standard "Compression Test"
GB / T 8897.4-2002 JR batteries Part 4 Safety requirements for lithium batteries "Extrusion"
SJ / T 11 1 70 a 1 998 household and commercial battery safety standards "squeeze"
YDB 032-2009J ~ _ credit backup lithium-ion battery pack "anti-extrusion"
UL2054 safety standard "compression test"
QB / T 2502-2000 lithium ion battery general specification "extrusion (internal short circuit) test"
GB31 24 BU 201 4 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"

Technical Parameters

Specifications Model		MHS-JZlOT	MHS-JZ20T	MHS-JZ30T	MHS-JZ50T	MHS-JZl00T	MHS-JZ200T	MHS-JZ500T
Pressure (T)		10	20	30	50	100	200	500
Displacement limit (mm)		500	500	500	500	1000	1000	1000
auxiliary system		Temperature, current, voltage acquisition, fire extinguishing system, smoke emission system, smoke filtration system, safety explosion-proof system, video monitoring system
control method		Remote control
Test space		500 * 500 * 500MM 1000 * 1000 * 1000MM (can be customized according to the test sample size)
Test chamber size		Actual box size prevail
safety protection		Overvoltage, overload, over current, over temperature, leakage protection, smoke alarm, test abnormal alarm
Structure part	Box	Vertical or horizontal (depending on test sample)
	control box	The control box is separate from the test chamber to ensure the safety of the test personnel
	Test fixture	Custom fixture according to the particularity of the test sample
	Extrusion head	Opposite extrusion head, flat squeeze plate, round squeeze plate, according to different test standards matching different extrusion head
	acupuncture	Acupuncture needle form, fixed by the drill sleeve, easy to replace
	Data acquisition module	Remote isolation independent acquisition, multi-channel voltage, current, temperature acquisition channel, to ensure accurate data collection
	Number of channels	2 channels, 4 channels, 8 channels, a variety of acquisition systems (optional)
	communication	Using R232,485 communication interface to ensure the stability of long-distance data acquisition and real-time, and has an explosion-proof function
	Camera monitoring system	Detection area with high-definition camera monitoring system, remote control, and has an explosion-proof function (optional)
Technical Parameters	Voltage selection	O-10V、O-lOOV
	Temperature acquisition range	O℃-1200℃
	Voltage resolution	1mV
	Extrusion / acupuncture resolution	1mm
	Temperature resolution	0.1℃
	Extrusion / acupuncture speed	Lmm / s 100mm / s (adjustable)
	Voltage, temperature accuracy	±1％FS
	Extrusion / Needle Accuracy	±1％
	Squeeze / acupuncture hold time	O-999S, time and status can be adjusted according to the test requirements
	Extrusion deformation	O-100% multi-gear distribution can be achieved continuously multi-layer extrusion deformation state
	Squeeze / acupuncture direction	Horizontal, vertical (depending on the actual situation)
	Drive mode	Servo motor hydraulic
	voltage	Av 220C 50HZ		Av 380V 50HZ three-phase five-wire
	Test environment	Servo motor hydraulic
Meet the test standards	Metal hydride nickel batteries for electric road vehicles GB / T 18332.2-2001 Lithium - ion batteries for electric vehicles Metal Hydride Nickel Batteries for Electric Vehicles Batteries and chargers for electric bicycles - Part 3: Chargers for electric bicycles Test standards for lithium batteries for electric bicycles Safety specification for hazardous characteristics of dangerous goods for lithium battery packs GB 19521.11-2005 (ATO / IEc / sAE / JEvA / cEN, etc.), the International Standards Association and the "863 Plan" electric vehicle major special test specifications
Explosion protection	structure	The use of double-thick steel plate and stainless steel protective net design, electrical components are used explosion-proof parts and protective isolation measures
	Overall rating	Explosion protection class both Exd IIBT4
	Exhaust fan	Using high temperature explosion-proof motor
	flashlight	High-brightness explosion-proof LED energy-saving lamps
	switch	Explosion - proof switch
	Equipment door	Fire retardant and stainless steel protective net
operating system Overview	Manual and automatic two modes of operation and procedures, constant pressure two forms of technology. Manual mode is no need to edit the process, manual control conditions, The automatic mode is to automatically follow the edited process (displacement, pressure, hold time, etc.) According to the special requirements of customers, we can specially design and production, the maximum to meet customer production process requirements. Optional configuration ● Horizontal or vertical ● Can be commissioned and fixed speed ● Automatic fire extinguishing device ● Video monitoring system ● 5T 2000T need special custom
data collection system	data collection system: 1. ARM7 + u C / OS II development and design, real-time online set the minimum frequency of 10ms, displacement, pressure can be independently programmed to complete. Multi-channel data sampling module, voltage, temperature acquisition path using N * 4 mode (scalable). Equipped with Rs232, Rs485 serial port, can be connected to multiple detection instruments to achieve automatic data acquisition, anti-interference ability. The test uses full video surveillance to ensure that the test data is accurate and accurate. Data automatically recorded and stored online, automatically generate test reports. 2. Data acquisition system principle: The data acquisition system is placed at the monitored control device and sampled, held and fed into the A / D converter into a digital signal by means of the sensor voltage and temperature signal. The signal is then sent to the FIFO. When the data stored in FIF0 to a certain number, read from the FIFO by the ARM7, and then through the ARM7 Ethernet interface or Rs232 sent to the host computer. Taking into account the equipment to be monitored may be a lot, so the design of multi-channel acquisition channel, they are through the analog switch and then enter the A / D converter. CPLD is the control core of the entire system. He controls the switching of the acquisition channel, the A / D converter's start / stop, and the converted data is stored in the F-processor. The interrupt request is generated to inform Af (M7) The data stored in the F worker, and so on.
power system	Hydraulic system using variable pump fuel supply system, the use of large flow control valve block, the pump inlet oil filter set, the pump outlet set high pressure oil filter to prevent impurities into the hydraulic system to ensure the normal operation of the oil The The system has oil temperature, oil level display, air filter and other devices. Fuel tank for the steel pull welded structure, with a cleaning window, the bottom of the oil and oil discharge plug.

Aerospace